Users browsing this thread: 3 Guest(s)
The Official Pokemon Colosseum Project [Last update: 1/8/2014]
#91
Why do we need to fix the textures instead of just moving the uv an inch?
Thanked by:
#92
(05-18-2012, 02:45 AM)thegameexplorer Wrote: Why do we need to fix the textures instead of just moving the uv an inch?
Texture clamping. A lot of N64/Gamecube games have it.
Thanked by: Garamonde, AllenSword, TGE
#93
I unclaim Charizard, and I claim Luvdisc and Hoothoot!
Download in a minute!
Thanked by: AllenSword
#94
I'm sorry, but I must ask, what is texture clamping?
Also, may I claim Charmander?
So, like totally.
Thanked by: AllenSword, TGE
#95
Here they are!

[Image: luvdiscicon.png]
[Image: hoothooticon.png]
Thanked by: Garamonde
#96
Luvdisc's textures are upside-down, and it's missing its cheeks. This is how it should look:

And Hoothoot looks like it has both texture problems (its talons) and smoothing problems...

(05-18-2012, 01:45 PM)TheAmazingSnivy Wrote: I'm sorry, but I must ask, what is texture clamping?
Texture clamping is, basically, where it artificially stretches the very edges of the texture instead of looping. Like this:

(Unclamped on the left, clamped on the right.)

To fix that, you'll need to double the size of the texture's canvas (128x128 becomes 256x256, for example), centre it and then stretch the texture's edges to fill up the empty space. And then modify the UV mapping by 0.25x and tiling by 0.5x to fix it. Repeat if it's still not proper.
#97
And how can I fix the smoothing problems?
Thanked by:
#98
(05-18-2012, 04:14 PM)thegameexplorer Wrote: And how can I fix the smoothing problems?
Weld the vertices by "0.001", and set the "Smooth" group to "1" for the entire model, after you've attached the entire model to one polygon group.
#99
I wish I could thank you more than once.
So, like totally.
Thanked by: Garamonde
Wow I gotta lot to catch up on! Okay, all claim statuses have been updated! Also, the link to the tutorial has been fixed.
Thanked by:
(05-16-2012, 11:22 PM)AllenSword Wrote: @Mighty Jetters, thegameexplorer, Ploaj, John2k4: It has been 2 out of 4 months. I'm just letting you all know in case you are still in the project.

Yeah, I know, I'm trying to make time to do it.
In fact, I took a look at the guide some time ago, and I have a several questions about it (only just now getting around to asking them >_>)...

1: The 3D Ripper DX link you provided in the guide does not take me directly to the download and there is no place to download it.
Not that I'm going to use it (I'm going to try 3DVIA), just thought I'd bring up this problem.

2: With 3DVIA, I don't know what to download exactly, "3DVIA Composer"? I also only see a free trial of it...

3: Again with 3DVIA, I don't understand about the part where you said that if the model uses more than one of the same object, it won't be ripped. Does that mean that since Pichu, Registeel and Gligar probably have mostly symmetrical bodies, that it won't all be captured and I'll have to copy-paste the one side and attach it manually, or does that only count for "separated/floating/unattached" objects like you showed in the example image?

4: While I find the fact that it t-poses most models, has no scaling issues and does not require re-mapping to be very favorable compared to 3D Ripper DX, I don't exactly like the idea of needing a special plug-in for 3DS Max, plus am concerned about the object thing mentioned above. However if this is going to work better for me than 3D Ripper, which after reading the descriptions of both (and skimming through Zerox's huge and complex guide...), I believe that may be the case, then I'll be willing to download/set up a simple plug-in if the object issue isn't anything too drastic/troublesome.

5: You say that for both 3D Ripper DX and 3DVIA, you need 32-bit Dolphin. I already have 64-bit, and I'm not sure if I should waste space getting the 32-bit version as well, but I will if I must.

6: You say that welding/joining/etc. is more difficult with 3DS Max? Sick
I don't know anything about Blender so I will not be using that... I guess I have a lot to look forward to when I do this. Blank

7: I at least tried to go get KoichiSenada's plug-in, but I just want to know:
After navigating to the folder with the plug-in folders, I see that there are 6 of them as seen here, and I assume the one on the bottom is the latest version (has a later date on it), but I want to be sure if I should get that one.

And I think that's all. At least until I actually go about doing it anyway. <_>
Sorry for all the questions and the ginormous post.
[Image: sweet-capn-cakes-deltarune.gif]
Thanked by:
I think it's the one that's on the bottom, yes. You might try that one.
So, like totally.
Thanked by:
(05-18-2012, 10:20 PM)Mighty Jetters Wrote:
Wow, thanks for pointing all that out for me! I gotta update my guide now. You actually pointed out some very important issues.

1. I'll fix it in the updated guide.
2. This is nobody's fault. You have to download 3dvia printscreen 2.3. Guess what? They took it down from their site so no one can get it. Luckily, I have a copy of the installer! I'll pm it to anyone who needs it and include it in the updated guide.
3. Mainly it appears to be the separated objects issue. You'll see this happen with sentret's feet for example. When you rip him, he only has one foot instead of two. That's what I meant by that. Sorry for the confusion.
4. You'd need a plugin if you used 3d ripper dx for best results. These rippers use special formats. Yes, 3d ripper exports to .obj, but it doesn't always have the best results. I can help you set that up, and will probably include instructions in the updated guide.
5. It has to be 32bit, sorry.
6. It seems to be in my experience, then again I'm not very handy with 3ds max. I just use it for conversion and cleaning up the ripped scenes.Shy It's not that hard to use blender for it though.
7. I'll include the most recent plugin in the tutorial as well. I'll pm you it shortly.

UPDATE: I updated the tutorial. Check the first post. It includes everything you should need including a 32 bit version of dolphin.
Thanked by: Garamonde
I'm still planning on doing it but I haven't found my copy of the game and I don't feel like downloading it.
If the TheAmazingSnivy completes that fsys viewer thingy that could really help with ripping the models from this game. Not to mention I read somewere on the smash boards that someone was making a converter for brawl that can open this format.

Frankly, I think it would be easier to wait for a converter of some sort.
I'm going to try to get Chikorita anyway though when I do manage to find my Pokemon Colosseum.
Thanked by:
(05-19-2012, 12:10 AM)Ploaj Wrote: I'm still planning on doing it but I haven't found my copy of the game and I don't feel like downloading it.
If the TheAmazingSnivy completes that fsys viewer thingy that could really help with ripping the models from this game. Not to mention I read somewere on the smash boards that someone was making a converter for brawl that can open this format.

Frankly, I think it would be easier to wait for a converter of some sort.
I'm going to try to get Chikorita anyway though when I do manage to find my Pokemon Colosseum.

Wait, someone else is doing it? Could you PM me a link?
So, like totally.
Thanked by:


Forum Jump: