Users browsing this thread: 8 Guest(s)
Super Smash Bros. Ultimate Ripping Project
(12-30-2018, 02:04 AM)Fobwashed Wrote: [Image: 3072611-toosweetmm.png]I think I got it working but can't seem to get the different facial expressions to work correctly. Stuck with the base for most models. Anyone having better luck?

First off, awesome pose!
As for your question, are you using Blender? I should be able to help if you are but if not then I can't, sorry.
Reply
Thanked by: Austin Zimmermann
How would I rip the models for the stages from the game?
Reply
Thanked by: Austin Zimmermann
Got Isabelle Ripped and textures converted! Time to throw a blender rig into it.
Everyone Use the VirtualTurtle Method. He makes the act of converting it super easy. AND he provides you a script that goes through the faces and organizes them. Such a god send.

[Image: LUQ0CRd.jpg]
Reply
(12-30-2018, 07:11 PM)Tashii Wrote: Got Isabelle Ripped and textures converted! Time to throw a blender rig into it.
Everyone Use the VirtualTurtle Method. He makes the act of converting it super easy. AND he provides you a script that goes through the faces and organizes them. Such a god send.

[Image: LUQ0CRd.jpg]
You're right, infact, I finally now use blender for these cases

This is a wip btw
[Image: aa.png]
Reply
Thanked by: Austin Zimmermann
(12-30-2018, 07:32 PM)Essential Wrote:
(12-30-2018, 07:11 PM)Tashii Wrote: Got Isabelle Ripped and textures converted! Time to throw a blender rig into it.
Everyone Use the VirtualTurtle Method. He makes the act of converting it super easy. AND he provides you a script that goes through the faces and organizes them. Such a god send.

[Image: LUQ0CRd.jpg]
You're right, infact, I finally now use blender for these cases

This is a wip btw
[Image: aa.png]

Nice! Yea Blender is powerful and I use it everyday. Turtle makes this whole lot easier with his script
Reply
Thanked by: Austin Zimmermann
Does anyone know why the normal maps look weaker (if not just wrong) when put into 3DS Max?
Reply
Thanked by:
I'm running into a weird issue in Blender where King K Rool's cape is rendering with what looks like weird polys. Also, all the metallic segments don't seem to light up and are rendering almost completely black. Anyone have any ideas on what might be causing this?[Image: 3072744-krool.png]
[Image: 3072745-kroolfront.png]
Reply
Thanked by: Austin Zimmermann
(12-31-2018, 01:51 AM)Fobwashed Wrote: I'm running into a weird issue in Blender where King K Rool's cape is rendering with what looks like weird polys. Also, all the metallic segments don't seem to light up and are rendering almost completely black. Anyone have any ideas on what might be causing this?[Image: 3072744-krool.png]
[Image: 3072745-kroolfront.png]
For the cape issue, there are 2 capes clipping I suggest to turn off the view on one of the two capes from at least how I experienced.
Reply
Thanked by: Austin Zimmermann
(12-31-2018, 01:58 AM)Essential Wrote:
(12-31-2018, 01:51 AM)Fobwashed Wrote: I'm running into a weird issue in Blender where King K Rool's cape is rendering with what looks like weird polys. Also, all the metallic segments don't seem to light up and are rendering almost completely black. Anyone have any ideas on what might be causing this?[Image: 3072744-krool.png]
[Image: 3072745-kroolfront.png]
For the cape issue, there are 2 capes clipping I suggest to turn off the view on one of the two capes from at least how I experienced.

You have two solutions to this. Either A: In edit mode of those two capes press w and hit remove doubles OR press L with your mouse overing over one of the capes and hit alt-s That will shrink the cape
Reply
Thanked by: Austin Zimmermann
(12-31-2018, 02:22 AM)Tashii Wrote:
(12-31-2018, 01:58 AM)Essential Wrote:
(12-31-2018, 01:51 AM)Fobwashed Wrote: I'm running into a weird issue in Blender where King K Rool's cape is rendering with what looks like weird polys. Also, all the metallic segments don't seem to light up and are rendering almost completely black. Anyone have any ideas on what might be causing this?[Image: 3072744-krool.png]
[Image: 3072745-kroolfront.png]
For the cape issue, there are 2 capes clipping I suggest to turn off the view on one of the two capes from at least how I experienced.

You have two solutions to this. Either A: In edit mode of those two capes press w and hit remove doubles OR press L with your mouse overing over one of the capes and hit alt-s That will shrink the cape

I don't think there are two capes. There are multiple sections but they don't overlap in the area that's showing the weird triangles. There's a front cape that's the front part by the gem, the main back of the cape and one final section that's just the transparent and cut out portion of the cape. I tried the remove doubles and that didn't solve the issue. With the cape selected I went to remove doubles and it logged that zero vertices were removed.
Reply
Thanked by: Austin Zimmermann
(12-31-2018, 03:13 AM)Fobwashed Wrote:
(12-31-2018, 02:22 AM)Tashii Wrote:
(12-31-2018, 01:58 AM)Essential Wrote: For the cape issue, there are 2 capes clipping I suggest to turn off the view on one of the two capes from at least how I experienced.

You have two solutions to this. Either A: In edit mode of those two capes press w and hit remove doubles OR press L with your mouse overing over one of the capes and hit alt-s That will shrink the cape

I don't think there are two capes. There are multiple sections but they don't overlap in the area that's showing the weird triangles. There's a front cape that's the front part by the gem, the main back of the cape and one final section that's just the transparent and cut out portion of the cape. I tried the remove doubles and that didn't solve the issue. With the cape selected I went to remove doubles and it logged that zero vertices were removed.

Increase the threshold of the remove doubles. Did you grab this from the model resource or is this a fresh rip?
Reply
Thanked by: Austin Zimmermann
It seems as though the weirdness in Blender with metals is with all very metallic surfaces. I'm running into the same problems with cloud as I did with Krool. Anyone else running into this?
[Image: 3072752-cloud.png]
Reply
Thanked by: Austin Zimmermann
(12-31-2018, 03:19 AM)Tashii Wrote:
(12-31-2018, 03:13 AM)Fobwashed Wrote:
(12-31-2018, 02:22 AM)Tashii Wrote: You have two solutions to this. Either A: In edit mode of those two capes press w and hit remove doubles OR press L with your mouse overing over one of the capes and hit alt-s That will shrink the cape

I don't think there are two capes. There are multiple sections but they don't overlap in the area that's showing the weird triangles. There's a front cape that's the front part by the gem, the main back of the cape and one final section that's just the transparent and cut out portion of the cape. I tried the remove doubles and that didn't solve the issue. With the cape selected I went to remove doubles and it logged that zero vertices were removed.

Increase the threshold of the remove doubles. Did you grab this from the model resource or is this a fresh rip?

Remove doubles isnt the way to go here, since the cape is two models a front and a back, by removing doubles, you're mixing the two meshes. Select the inner or outer and scale tangent using alt+S That's what I had to do with ganon

(12-31-2018, 03:54 AM)Fobwashed Wrote: It seems as though the weirdness in Blender with metals is with all very metallic surfaces. I'm running into the same problems with cloud as I did with Krool. Anyone else running into this?
[Image: 3072752-cloud.png]

I ran into this issue with ganon too actually, but the way I fixed it was by not rendering in Blender Cycles, I moved to Blender 2.8 and rendered with eevee and it worked just fine (and realtime)
Reply
Thanked by: Austin Zimmermann
(12-31-2018, 03:54 AM)Fobwashed Wrote: It seems as though the weirdness in Blender with metals is with all very metallic surfaces. I'm running into the same problems with cloud as I did with Krool. Anyone else running into this?
[Image: 3072752-cloud.png]

I usually find 2 methods fix this
1. Select the mesh with the issues, in this case the metal mesh. Press "Tab" to go into edit mode, then on the menu on the left, scroll down to find "remove duplicates" and click it. Whenever I get a new model I Blender, I actually make it a habit to do this with every layer. It takes a few minutes but is worth it.
2. I disable any shadows on the mesh with the problems. To do this go to the materials tab, scroll down to "Shadows" and untick all the boxes.
Reply
Thanked by: Austin Zimmermann
(12-31-2018, 07:57 AM)VirtualTurtle Wrote:
(12-31-2018, 03:19 AM)Tashii Wrote:
(12-31-2018, 03:13 AM)Fobwashed Wrote: I don't think there are two capes. There are multiple sections but they don't overlap in the area that's showing the weird triangles. There's a front cape that's the front part by the gem, the main back of the cape and one final section that's just the transparent and cut out portion of the cape. I tried the remove doubles and that didn't solve the issue. With the cape selected I went to remove doubles and it logged that zero vertices were removed.

Increase the threshold of the remove doubles. Did you grab this from the model resource or is this a fresh rip?

Remove doubles isnt the way to go here, since the cape is two models a front and a back, by removing doubles, you're mixing the two meshes. Select the inner or outer and scale tangent using alt+S That's what I had to do with ganon

(12-31-2018, 03:54 AM)Fobwashed Wrote: It seems as though the weirdness in Blender with metals is with all very metallic surfaces. I'm running into the same problems with cloud as I did with Krool. Anyone else running into this?
[Image: 3072752-cloud.png]

I ran into this issue with ganon too actually, but the way I fixed it was by not rendering in Blender Cycles, I moved to Blender 2.8 and rendered with eevee and it worked just fine (and realtime)
Moving to Blender 2.8 and rendering with eevee seems to have worked for me too. This also looks like it shows that removing doubles wasn't the issue as that's fixed without making any changes besides changing the render engine.
[Image: 3072840-cycles.png]
2.8 cycles

[Image: 3072841-evee.png]
2.8 eevee
Reply
Thanked by: Austin Zimmermann


Forum Jump: