Users browsing this thread: 7 Guest(s)
Suggestions
So I managed to get 1 example model to work. GetArchive button will give the zip. File list combobox could be used to view other files but not functional in this one.

https://googledrive.com/host/0B4aKV4dF92...hSeHBvb00/

There really are so many problems to take care of. For instance in the models I uploaded, - or _ characters in file names seem to cause problems with materials. Also in another file (ORAS Pokecenter) the MTL file doesn't have file extensions so it doesn't even load correctly in Blender. Guessing all these and acting accordingly won't be easy. Then I don't even know if TGA or DDS image files can be loaded correctly. Perhaps if some kind of guidelines were created, it would be easier to handle.
Reply
Thanked by:
Can we get strikethrough for comments?
Doofenshmirtz: This is a little bit awkward but have you seen my escape jet keys? (Perry nods) What, you have? Well that's great! So where are they? (Perry looks away) You won't tell me? Is this because you don't speak or are you just being a jerk?
~Phineas and Ferb, "One Good Scare Ought to Do It!" (2008)
Reply
Thanked by:
(08-04-2015, 05:09 AM)aceres Wrote: So I managed to get 1 example model to work. GetArchive button will give the zip. File list combobox could be used to view other files but not functional in this one.

https://googledrive.com/host/0B4aKV4dF92...hSeHBvb00/

There really are so many problems to take care of. For instance in the models I uploaded, - or _ characters in file names seem to cause problems with materials. Also in another file (ORAS Pokecenter) the MTL file doesn't have file extensions so it doesn't even load correctly in Blender. Guessing all these and acting accordingly won't be easy. Then I don't even know if TGA or DDS image files can be loaded correctly. Perhaps if some kind of guidelines were created, it would be easier to handle.

This is really cool, even if it is only working on one model right now. Nice work! Unfortunately, it seems like you're running into a number of the problems I mentioned, specifically in the fact that there are so many variables that it will be very difficult to come up with a solution that works with everything already on the site without re-packaging all of them (a monumental task with 10,437 accepted models at the time of this writing). That said though, the progress is encouraging and I'd love to get something working if it's possible (though I'd still rather do it without Flash in the end).

(08-04-2015, 06:55 PM)Deathbringer Wrote: Can we get strikethrough for comments?

I don't see why not. I'll add it in a bit.

Edit:
All done. You should be able to use strikethrough in comments now.
Reply
Thanked by:
(08-05-2015, 12:27 PM)Petie Wrote: This is really cool, even if it is only working on one model right now. Nice work! Unfortunately, it seems like you're running into a number of the problems I mentioned, specifically in the fact that there are so many variables that it will be very difficult to come up with a solution that works with everything already on the site without re-packaging all of them (a monumental task with 10,437 accepted models at the time of this writing). That said though, the progress is encouraging and I'd love to get something working if it's possible (though I'd still rather do it without Flash in the end).

For HTML5 we'll have to wait for medusa86 since I don't know and like it. Still, If I can come up with something perhaps he can work something out from my codes (change lines to their JavaScript counterparts).

Now having something that will open all is impossible since there are models that don't even work correctly (some materials don't get loaded in Blender at the moment). What I was thinking was like the best that can be done. It will open what's possible and simple give error like "can't process this" for problematic ones.

We should definitely set up some guidelines and perhaps uploaders can update their work to match the guidelines. For instance:
- only OBJ or DAE(for skeleton support) formats for the meshes.
- only PNG or JPG formats for the images/textures.
- only letters and numbers in file names, or any other labels like material or bone names. Even space, - or _ might cause problems.

These are what I think would make things easier so far.
Reply
Thanked by:
(08-05-2015, 12:27 PM)Petie Wrote: Edit:
All done. You should be able to use strikethrough in comments now.

It works.
Doofenshmirtz: This is a little bit awkward but have you seen my escape jet keys? (Perry nods) What, you have? Well that's great! So where are they? (Perry looks away) You won't tell me? Is this because you don't speak or are you just being a jerk?
~Phineas and Ferb, "One Good Scare Ought to Do It!" (2008)
Reply
Thanked by:
(08-05-2015, 01:09 PM)aceres Wrote:
(08-05-2015, 12:27 PM)Petie Wrote: This is really cool, even if it is only working on one model right now. Nice work! Unfortunately, it seems like you're running into a number of the problems I mentioned, specifically in the fact that there are so many variables that it will be very difficult to come up with a solution that works with everything already on the site without re-packaging all of them (a monumental task with 10,437 accepted models at the time of this writing). That said though, the progress is encouraging and I'd love to get something working if it's possible (though I'd still rather do it without Flash in the end).

For HTML5 we'll have to wait for medusa86 since I don't know and like it. Still, If I can come up with something perhaps he can work something out from my codes (change lines to their JavaScript counterparts).

Now having something that will open all is impossible since there are models that don't even work correctly (some materials don't get loaded in Blender at the moment). What I was thinking was like the best that can be done. It will open what's possible and simple give error like "can't process this" for problematic ones.

We should definitely set up some guidelines and perhaps uploaders can update their work to match the guidelines. For instance:
- only OBJ or DAE(for skeleton support) formats for the meshes.
- only PNG or JPG formats for the images/textures.
- only letters and numbers in file names, or any other labels like material or bone names. Even space, - or _ might cause problems.

These are what I think would make things easier so far.

Submitting only allows PNG textures. And for models, you need to have an OBJ/DAE in the ZIP, for it to be considered to be uploaded.

-----------------------

Would it be possible on the resources, have a subsection option, kinda like this:
Code:
Trophies-------
              |
              Super Mario Series
                             |
                             Mario
Reply
Thanked by:
(08-06-2015, 07:41 PM)ThatTrueStruggle Wrote: Would it be possible on the resources, have a subsection option, kinda like this:
Code:
Trophies-------
              |
              Super Mario Series
                             |
                             Mario

I'm not sure I follow what you're asking for here. Where do you want this to appear?
Reply
Thanked by:
(08-06-2015, 08:49 PM)Petie Wrote:
(08-06-2015, 07:41 PM)ThatTrueStruggle Wrote: Would it be possible on the resources, have a subsection option, kinda like this:
Code:
Trophies-------
              |
              Super Mario Series
                             |
                             Mario

I'm not sure I follow what you're asking for here. Where do you want this to appear?

On the Models/Sounds/Sprites/Textures resources, there should be a sub section, like having a section inside a section
Reply
Thanked by:
I'm still not sure I understand...
Tsunami Bomb - The Simple Truth
We could run away
Leave behind anything paper
Not knowing where we're going to stay
When there's no Mondays

You're part of me, it's so easy to see the simple truth
When I'm in your arms, I feel safe from harm and sorrow too
You're part of me, it's so easy to see the simple truth
But most of all, nothing couldn't be solved when I'm with you
Reply
Thanked by: Struggleton!
(08-07-2015, 05:29 AM)Dazz Wrote: I'm still not sure I understand...

I made a quick mock up of what I mean:
[Image: sWC1lwo.png]
Reply
Thanked by:
I see what you mean, but it's ultimately pointless. The rare occasions when this is needed, we just use Trophies - Pokemon Series, Trophies - Zelda Series, etc.
Tsunami Bomb - The Simple Truth
We could run away
Leave behind anything paper
Not knowing where we're going to stay
When there's no Mondays

You're part of me, it's so easy to see the simple truth
When I'm in your arms, I feel safe from harm and sorrow too
You're part of me, it's so easy to see the simple truth
But most of all, nothing couldn't be solved when I'm with you
Reply
Thanked by: Struggleton!
I think having subsections in a way that they'll be loaded when needed would be better. For instance when you open a Pokemon game page, all the icons take time to load. If you saw sections and 1 icon (or 4 random icons) from the section, then you could visit the section page you need. If you are looking for Charizard content, you could just visit Generation 1 section and spare other hundreds of icons from bandwidth.
Reply
Thanked by:
That's a lot of work for very little purpose outside of a few select games though. It would be almost universally unused and if you really want just Charizard content, you can already get it via the search function.
Reply
Thanked by:
So here I made it more functional. You can select files from the drop down including image and text files. 3D objects can be rotated and zoomed(with mouse wheel). There are still many models that won't work properly though. Some will never show up and notice the one on the right has both OBJ and DAE files. OBJ seems to have errors mostly around cloth edges. DAE seems better but lacks transparencies.

https://googledrive.com/host/0B4aKV4dF92...xuVi1LX2M/

If you want you can copy the item page and make a test page for people to test how functional this is. You need to get the SWF file at https://googledrive.com/host/0B4aKV4dF92...ewer3d.swf and upload it to file host. This is for Flash to be able to access archives' binary data.

Then include this embed code in the test page.

Code:
<object data="viewer3d.swf" width="750" height="690" type="application/x-shockwave-flash">
    <param name="movie" value="viewer3d.swf"/>
    <param name="flashvars" value="archive=Mobile - Subway Surfers - Zoe.zip" />
    <param name="quality" value="high"/>
    <param name="wmode" value="gpu"/>
    <param name="allowFullScreen" value="true"/>
    <a href="https://get.adobe.com/flashplayer/"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" /></a>
</object>

Notice there are 2 "viewer3d.swf" part, both should be changed to your SWF url. Then "Mobile - Subway Surfers - Zoe.zip" should be changed with a script code that places the archive url of that item.
Reply
Thanked by:
I'd be half tempted to give this a small scale test, assuming that Petie agrees. It looks like it has a pretty good result from the items you've shown!!

I'd be curious to see if it'd work with the majority of models on the site. We'd likely still keep the renders that are there now and simply have a feature to click to load the viewer in. The main reason for this being lack of support for flash, such as on mobile devices, and to reduce download sizes.
Tsunami Bomb - The Simple Truth
We could run away
Leave behind anything paper
Not knowing where we're going to stay
When there's no Mondays

You're part of me, it's so easy to see the simple truth
When I'm in your arms, I feel safe from harm and sorrow too
You're part of me, it's so easy to see the simple truth
But most of all, nothing couldn't be solved when I'm with you
Reply
Thanked by:


Forum Jump: